サンドブラッシング機

Steinemann NOVA LAM 180 – Sand Brushing

𝗚𝗲𝗻𝗲𝗿𝗮𝗹 𝗜𝗻𝗳𝗼𝗿𝗺𝗮𝘁𝗶𝗼𝗻
𝘐𝘵𝘦𝘮 𝘋𝘦𝘴𝘤𝘳𝘪𝘱𝘵𝘪𝘰𝘯
Machine Name: Steinemann NOVA LAM 180
Manufacturer: Steinemann Technology AG
Machine Type: Wide Belt Sanding and Sand Brushing Machine
Application: Surface calibration and finishing of HPL, CPL, and decorative laminate panels
Working Width: 1,800 mm (Nominal)
Process: Bottom sanding / Sand Brushing
Operating Principle: Continuous conveyor feed with abrasive belt sanding and brushing units

𝗠𝗮𝗶𝗻 𝗙𝗲𝗮𝘁𝘂𝗿𝗲𝘀
• High-precision calibration and surface finishing.
• Suitable for High-Pressure Laminate (HPL) and Continuous Pressure Laminate (CPL).
• Vacuum belt conveyor for stable material transport.
• Rubber-coated counter-pressure roller.
• Infrared abrasive belt tracking and monitoring.
• Automatic feed speed control under overload conditions.
• Driven top and bottom feed rollers.
• Reversible contact drum rotation (with or against feed direction).
• Guaranteed thickness tolerance up to ±0.025 mm.
• Optional automatic thickness adjustment.
• Optional ionizing bars for electrostatic discharge.

𝗧𝗲𝗰𝗵𝗻𝗶𝗰𝗮𝗹 𝗦𝗽𝗲𝗰𝗶𝗳𝗶𝗰𝗮𝘁𝗶𝗼𝗻𝘀
Parameter: Specification
Working Width: 1,800 mm (Model NOVA LAM 180)
Machine Opening: 150 / 300 mm
Production Speed: Up to 72 m/min
Contact Drum Diameter: Ø 275 mm
Abrasive Belt Length: 2,620 mm
Thickness Adjustment: 0.01 mm increments
Working Height: 1,400 mm
Minimum HPL Thickness: 0.4 mm (0.3 mm under specific conditions)
Minimum CPL Thickness: 0.2 mm

𝗧𝘆𝗽𝗶𝗰𝗮𝗹 𝗔𝗽𝗽𝗹𝗶𝗰𝗮𝘁𝗶𝗼𝗻𝘀
• Decorative laminate production
• Furniture panels
• Interior wall panels
• Compact laminate finishing
• Surface preparation before coating or printing
• Fine surface sanding and brushing

𝗠𝗮𝗰𝗵𝗶𝗻𝗲 𝗔𝗱𝘃𝗮𝗻𝘁𝗮𝗴𝗲𝘀
• Excellent surface quality.
• High dimensional accuracy.
• Stable production at high speeds.
• Reduced material waste.
• Reliable continuous operation.
• Suitable for high-volume industrial manufacturing.

𝗦𝗮𝗳𝗲𝘁𝘆 𝗙𝗲𝗮𝘁𝘂𝗿𝗲𝘀
• Automatic overload protection.
• Abrasive belt monitoring system.
• Emergency stop system.
• Safety guards around moving parts.
• Controlled feed system for operator safety.

𝗥𝗼𝘂𝘁𝗶𝗻𝗲 𝗠𝗮𝗶𝗻𝘁𝗲𝗻𝗮𝗻𝗰𝗲

Frequency: Maintenance Task
Daily: Clean sanding area and vacuum system
Daily: Inspect abrasive belts and brushing units
Weekly: Check conveyor alignment
Weekly: Inspect pressure rollers
Monthly: Lubricate moving components according to manufacturer recommendations
Monthly: Verify belt tracking and sensor operation
As Required: Replace abrasive belts and brushes

𝗧𝘆𝗽𝗶𝗰𝗮𝗹 𝗖𝗼𝗻𝘀𝘂𝗺𝗮𝗯𝗹𝗲𝘀
• Abrasive sanding belts
• Sand brushing rollers
• Conveyor belts
• Pressure rollers
• Bearings
• Vacuum filters
Ijdozmgicepfx Aihjaw

𝗠𝗮𝗰𝗵𝗶𝗻𝗲 𝗙𝘂𝗻𝗰𝘁𝗶𝗼𝗻
The Steinemann NOVA LAM 180 is a high-precision industrial sanding and sand-brushing machine designed for calibrating and finishing laminate surfaces. It combines wide belt sanding technology with brushing operations to achieve consistent thickness, superior surface quality, and excellent production efficiency. The machine is widely used in the laminate, furniture, and decorative panel industries where high-quality surface finishing is required.

Please note that this description may have been translated automatically. Contact us for further information. The information in this classified ad is only indicative. We recommend checking the details with the seller before a purchase.

この広告は自動翻訳されています。翻訳ミスがある可能性があります。