ペレットプレスSRE Opcon Group
ペレットプレス
SRE Opcon Group
固定価格 消費税別
€35,000
状態
中古
所在地
Cēsis 

基本データ
価格と所在地
固定価格 消費税別
€35,000
- 所在地:
- Valmieras iela 20A, LV4101 Cesis, Latvia

電話する
オファーの詳細
- 広告ID:
- A22591362
- 更新:
- 最終更新日:20.08.2026
説明
SPE Renergi Low Temperature Dryer.
The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels.
The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C.
Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur.
Power supply Data:
• Voltage 400 V AC, three phase
• Recommended fuses in supply line: maximum 3x630 A
• Typical power consumption: 200kW
The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet).
Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h.
Airflow: max 200 liter/min
Air pressure: min 4,5 bar, recommended 6,0-8,0 bar
Water supply: hot water supply, with a flow of 32 dm3/s.
Water pressure: min 1.5 bar, max 6.0 bar
Operating temperature range:
Dkjdpfx Aaezvq Rcs Usu
• Incoming air temperature: -20°C to 50°C
• Relative humidity: 0% to 60%
Raw material/media:
• Relative humidity: 45% to 55% by wieght
• Requested relative humidity: 8% to 15% in the dried material
Capacity:
• The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load
• The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour.
SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of:
• The Machinery Directive 2006/42/EC
• LVD 2006/95/EC
• EMC 2004/108/EC
The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time.
The dryer is already dismantled
All electrical schematics, manual, operating instructions available
Upon request, we can provide a contact person with this type of working dryer for consultation
Price: 35 000 EUR (VAT is not included)
The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels.
The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C.
Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur.
Power supply Data:
• Voltage 400 V AC, three phase
• Recommended fuses in supply line: maximum 3x630 A
• Typical power consumption: 200kW
The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet).
Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h.
Airflow: max 200 liter/min
Air pressure: min 4,5 bar, recommended 6,0-8,0 bar
Water supply: hot water supply, with a flow of 32 dm3/s.
Water pressure: min 1.5 bar, max 6.0 bar
Operating temperature range:
Dkjdpfx Aaezvq Rcs Usu
• Incoming air temperature: -20°C to 50°C
• Relative humidity: 0% to 60%
Raw material/media:
• Relative humidity: 45% to 55% by wieght
• Requested relative humidity: 8% to 15% in the dried material
Capacity:
• The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load
• The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour.
SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of:
• The Machinery Directive 2006/42/EC
• LVD 2006/95/EC
• EMC 2004/108/EC
The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time.
The dryer is already dismantled
All electrical schematics, manual, operating instructions available
Upon request, we can provide a contact person with this type of working dryer for consultation
Price: 35 000 EUR (VAT is not included)
提供者
注意: 無料で登録するかログインして、すべての情報を取得してください。
最終オンライン:先週
登録日: 2022
2 オンライン広告
お問い合わせを送信
電話 & ファックス
+371 27 3... 広告
これらの広告もご興味があるかもしれません。
成功
あなたのメッセージが送信されました。
小型広告
Dinkelscherben
9,295 km
コンベヤーベルト コンベヤーベルトクラッシャー
die magnetprofis2019010803
die magnetprofis2019010803
成功
あなたのメッセージが送信されました。
小型広告
Eilenburg
8,935 km
振動式ボウルフィーダー
Vibra SchultheisWFT 12/6-58-DV
Vibra SchultheisWFT 12/6-58-DV
成功
あなたのメッセージが送信されました。
小型広告
Reichenbach am Heuberg
9,393 km
チップふるい、ふるい機、振動ふるい
Henri Petit Jean kein SchwanogB 222
Henri Petit Jean kein SchwanogB 222
成功
あなたのメッセージが送信されました。
小型広告
Wekerom
9,179 km
バイブレーションふるい、振動ふるい、ふるい機
Vibra
Vibra
成功
あなたのメッセージが送信されました。
小型広告
ドイツ
9,329 km
ECOKRAFT LP 22
ECOKRAFTLP 22
ECOKRAFTLP 22
成功
あなたのメッセージが送信されました。
小型広告
Maastricht
9,290 km
ふるい機 Främbs Freudenberg 20/50-2
Främbs & FreudenbergScreening machine Främbs Freudenberg 20/50-2
Främbs & FreudenbergScreening machine Främbs Freudenberg 20/50-2
あなたの掲載は正常に削除されました
エラーが発生しました










































































