ねじ式/打栓式キャップ用キャッピングマシンR. Deckert
AVR 200
ねじ式/打栓式キャップ用キャッピングマシン
R. Deckert
AVR 200
製造年
2017
状態
中古
所在地
Kreuzau 

基本データ
価格と所在地
- 所在地:
- Schäfersgraben 15, 52372 Kreuzau, Deutschland

電話する
オファーの詳細
- 広告ID:
- A23342954
- リファレンス番号:
- 17431
- 更新:
- 最終更新日:16.11.2026
説明
Deckert AVR 200
Hodpfx Aj Akn Nmjdtjnw
Dropper inserter and cap closer / tamper-evident caps + induction sealing
This machine, which operates in a pulsed manner and has a linear design, is designed for sealing containers with a dropper inserter and a subsequent cap closer. The manufacturer specifies a maximum output of 120 containers per minute.
The filled containers are fed directly from the left into the working area via a conveyor belt, which is also part of the capping machine.
In principle, this machine – with the appropriate tooling – can handle the following range of container sizes:
Container diameter: 30 to 90 mm
Container height: 40 to 210 mm
Cap diameter: up to 90 mm
The filled containers are singulated using a conveyor system, brought to the correct spacing, and fed to the dropper insertion station. A sensor detects the position of the container and releases the subsequent steps. Two containers are processed simultaneously.
The droppers are fed via a two-lane sorting belt and a linear conveyor. The upright droppers are picked up by a transfer device using vacuum, positioned above the container, and inserted. Subsequently, the containers are passed by a sensor that registers the presence of the dropper and signals the next station to prepare a screw cap. If there is a misdetection, the container is rejected to a reject chute.
The containers and caps are transported and fed in a single lane via a sorting belt and a cap belt to a cap carousel. The screw caps to be processed are picked up in pairs by vacuum heads, lowered onto the containers, and pre-tightened. The pre-tightening station consists of 4 vacuum screw heads (2 operate simultaneously) and 4 container centering devices. A sensor checks the presence of the cap; if there is a misdetection, the container is rejected to a reject chute.
In the final tightening station, two downstream screw heads tighten the caps with a specified torque.
A pressing station also enables the processing of press-on closures, and a measuring cup attachment station allows the application of an additional measuring cup cap.
The finished containers are discharged from the conveyor system onto the conveyor belt and to the right, out of the machine.
The capping machine is controlled via a separate touch screen control panel on the left side of the machine front. The entire working area is securely enclosed with glass doors.
The delivery scope of the line includes various formats for:
Round bottles from 20 ml = Ø 28.8 mm to 100 ml = Ø 46.5 mm
Shaped bottles from 50 ml = 47 x 25 x 85 to 500 ml = 82 x 50 x 215 mm
Droppers Ø 16/11.5 mm x 27 mm
as well as
Screw caps from Ø 21 mm to 46 mm.
In addition,
measuring cups or overcaps Ø 27 x 25 mm or Ø 29.2 x 25 mm have been used on the machine.
この広告は自動翻訳されています。翻訳ミスがある可能性があります。
Hodpfx Aj Akn Nmjdtjnw
Dropper inserter and cap closer / tamper-evident caps + induction sealing
This machine, which operates in a pulsed manner and has a linear design, is designed for sealing containers with a dropper inserter and a subsequent cap closer. The manufacturer specifies a maximum output of 120 containers per minute.
The filled containers are fed directly from the left into the working area via a conveyor belt, which is also part of the capping machine.
In principle, this machine – with the appropriate tooling – can handle the following range of container sizes:
Container diameter: 30 to 90 mm
Container height: 40 to 210 mm
Cap diameter: up to 90 mm
The filled containers are singulated using a conveyor system, brought to the correct spacing, and fed to the dropper insertion station. A sensor detects the position of the container and releases the subsequent steps. Two containers are processed simultaneously.
The droppers are fed via a two-lane sorting belt and a linear conveyor. The upright droppers are picked up by a transfer device using vacuum, positioned above the container, and inserted. Subsequently, the containers are passed by a sensor that registers the presence of the dropper and signals the next station to prepare a screw cap. If there is a misdetection, the container is rejected to a reject chute.
The containers and caps are transported and fed in a single lane via a sorting belt and a cap belt to a cap carousel. The screw caps to be processed are picked up in pairs by vacuum heads, lowered onto the containers, and pre-tightened. The pre-tightening station consists of 4 vacuum screw heads (2 operate simultaneously) and 4 container centering devices. A sensor checks the presence of the cap; if there is a misdetection, the container is rejected to a reject chute.
In the final tightening station, two downstream screw heads tighten the caps with a specified torque.
A pressing station also enables the processing of press-on closures, and a measuring cup attachment station allows the application of an additional measuring cup cap.
The finished containers are discharged from the conveyor system onto the conveyor belt and to the right, out of the machine.
The capping machine is controlled via a separate touch screen control panel on the left side of the machine front. The entire working area is securely enclosed with glass doors.
The delivery scope of the line includes various formats for:
Round bottles from 20 ml = Ø 28.8 mm to 100 ml = Ø 46.5 mm
Shaped bottles from 50 ml = 47 x 25 x 85 to 500 ml = 82 x 50 x 215 mm
Droppers Ø 16/11.5 mm x 27 mm
as well as
Screw caps from Ø 21 mm to 46 mm.
In addition,
measuring cups or overcaps Ø 27 x 25 mm or Ø 29.2 x 25 mm have been used on the machine.
この広告は自動翻訳されています。翻訳ミスがある可能性があります。
提供者
注意: 無料で登録するかログインして、すべての情報を取得してください。
登録日: 2022
30 オンライン広告
お問い合わせを送信
電話 & ファックス
+49 2421 ... 広告
あなたの掲載は正常に削除されました
エラーが発生しました


















