プレートシート再研磨機

Petschauer PLT800

1 like-new manual plate seat re-grinding machine, Petschauer PLT800, with a cutting-off device for repairing HM teeth on circular saw blades with a diameter of 100 to 800 mm.

This machine is equipped with a double grinding wheel holder and a double saw blade holder for 2 different applications.

Right side: Re-grinding of the plate seat after unsoldering with a ceramic grinding wheel, 175 mm Ø and 4 mm wide, with an adjustment scale from 15° negative to 35° positive, with blade thickness adjustment.
Left side: Cutting off teeth that are too long with a diamond cutting disc, 150 or 175 mm Ø, approximately 1 mm wide. Adjustment scale for back clearance angle, 15° negative to 35° positive. The cutting-off process is performed at a 0° axial angle.
Additional applications:
Pedpfezz Rlkex Ah Eorc
Setting the tooth back
Setting the raker on CMT saw blades
Breast grinding using a diamond grinding wheel
Re-sharpening on the saw blade circumference at 0°
Alternate tooth arrangement possible.

Technical data:
Saw diameter: Max. 800 mm Ø
Weight without stand cabinet: 128 kg
Dimensions: Width: 92 cm, Depth: 72 cm, Height: 58 cm
Total power: 0.75 kW
Drive speed: 2600 rpm
Coolant tank: 60 liters
Dimensions: Ceramic grinding wheel 175 mm Ø
Diamond cutting disc: 150 or 175 mm Ø
Operating voltage: 230/400 Volt, 3 phases, 50 Hz or 230/440 Volt, 3 phases, 60 Hz
Protection: 3 slow-blow fuses, 10 A

この広告は自動翻訳されています。翻訳ミスがある可能性があります。