産業用懸垂式搬送システム

OCS Overhead Conveyor System GmbH OCS 500 Hängebahn/Montageanlage/Förderan

# OCS 500 Twin Track Conveyor and Assembly System with PRO-HUB Chain Hoist
Fpsdpfxezt Nnho Anpsk

For sale is a comprehensive conveyor and assembly system from OCS Overhead Conveyor System AB, type OCS 500 (Twin Track), from project 2064 – Streetscooter Düren.

The OCS 500 is a modular conveyor system designed for the transport of hanging trolleys. The trolleys can be moved manually or automatically within the system between different sections and workstations. The project-specific overall drawings show two assembly areas, designated as "Assembly Line 1" and "Assembly Line 2", as well as the transfer areas QVE1 and QVE2.

The driven sections of the OCS system operate according to the friction principle. Friction wheels transfer the movement of a rotating drive tube to the trolleys. The drive tube is driven by V-belts and worm gear motors. The manufacturer specifies a normal operating speed of 12–20 m/min for the OCS-500 system. Manual sections are also possible within the system.

The system includes chain hoists from PRO HUB Hebetechnik GmbH, designed for lifting passenger cars or commercial vehicles. The vehicle is supported via four lifting points. The lifting systems have pivoting and lockable lifting arms as well as a hydraulic safety device.

Technical data of the PRO-HUB chain hoists:

* maximum load capacity: 2,000 kg
* lifting stroke: 2,600 mm, adjustable
* lifting speed: 0.3–3.2 m/min, frequency-controlled
* corresponding to approx. 5–53.3 mm/s
* lifting time: approx. 59 s
* lowering time: approx. 59 s
* weight: approx. 3,200 kg
* length of stationary frame: 4,710 mm
* length of mobile frame: 4,670 mm
* frame width: 2,240 mm
* overall height: 555 mm without chain hoist
* motor power: 3.8 kW
* connection voltage: 400 V / 50 Hz
* control voltage: 230 V
* protection class: IP55
* noise level: 70 dB(A)
* year of manufacture: 2017/2018

The original documentation lists a STAHL CraneSystems ST5020-6/1.5 2/1 as the electric chain hoist. According to the PRO-HUB operating manual, the lifting and lowering movement is controlled via an HBC-radiomatic wireless remote control with dead man's function.

The safety equipment of the chain hoists includes, among other things, main/emergency stop switches, gearbox limit switches, crane disconnecting switch, arm locking device, hydraulic holding/catching cylinders and maintenance chains.

Extensive original documentation is available for the system and its components, including OCS operating instructions, overall and detail drawings, documents on conveyor technology and transfer cars, as well as the original operating manual for the PRO-HUB chain hoists and documentation on the control and safety components used.

この広告は自動翻訳されています。翻訳ミスがある可能性があります。