木質チップ乾燥機

Hotbox HB-1600

Description of fully automated dryer

Major overhauling made by mid 2025
• The housing of the dryer is welded steel construction. The internal floor is made of
perfored sheet board. The dryer has an external casing (walls and
ceiling) in sandwich panel.
• The dryer is driven by hydraulic power pack.
• The dryer is equipped with “Ziehl Abegg”, MAXvent axial fans. It's propeller blades
are made out of light casted material. One of the most energy efficient product on
the market.
Hot air generator is equipped with two “Geo Coil’’ heat exchangers. (fully functional but has bent fins)
• The control system is equipped with a touch display for operation and visualization
of the Dryer. Remote control via PC possible. Incl. web server on the panel for the
visualization of drying processes via Ethernet interface.
• Working mode according to air exit temperature. The rotational speed of the fans
automatically adjusted by the frequency converters so that a desired air temperature
level is maintained. Includes pressure measuring devices and extension of control
system.
• Dryer’s heat carrier temperature approx. 85°C flow temperature and approx. 65°C
return temperature. Heat carrier flow defined as 176m³/h
Rjdpfxjxc Eits Agwjp
• Drying air ventilators equipped with frequency converters
• Moisture sensors at the outlet of the dryer:
YES
• Adjustable height of drying bed: YES
• Enlarged fuel receiving bin: Yes
General specifications
• Infeed material: Wood chips
• Size of material: G100
• Water content infeed material max. 45%
• Water content outfeed material 7-10%
• Designed capacity outlet approx. 1.600
kg/h
• Density (wet): 300 kg/m³
• Designed drying surface approx.: 97 m²
• Designed climate conditions on site:
Ambient temperature 0°C; relative humidity
70%, air pressure: 990 mbar
• Noise pressure level, 75 dB, (1 m distance
from air inlet port)

Dryer fans, installed power: 74 kW
Dryer hydraulic powerpack: 15 kW