建材用バンドソー

CORMAK CS350

CORMAK CS350 Masonry Block Band Saw – Precision Cutting of Masonry Units
Standard building materials do not always match the dimensions specified in wall construction plans. The CORMAK CS350 masonry block band saw is designed for cutting masonry blocks to size for bricklaying and construction work. Its main advantage is the ability to cut elements up to 650 mm in height, which is particularly important when processing larger-format blocks.

The sliding worktable combines a stable support surface with the ability to move the material relative to the saw blade. This allows masonry components to be cut to the dimensions required for successive stages of wall construction at a single workstation, while maintaining control over the positioning of the workpiece.

Key Advantages of the CORMAK CS350
- Capacity for cutting tall masonry blocks – the working range accommodates blocks of considerable height, allowing operators to process both large and small formats. This is particularly important when preparing components with different proportions.
- Sliding worktable – the workpiece can be moved together with the table, making it easier to feed material into the cutting area. The workpiece remains supported throughout the movement.
- Clearly defined power requirements – the 1.85 kW motor operates on a 400 V power supply, allowing the appropriate electrical connection to be prepared in advance.
- Clearly specified cutting system parameters – the 34 × 4120 mm blade dimensions make it easy to identify the correct replacement blade, while the cutting speed of 140 m/min specifies the blade's operating speed.
- Cutting masonry blocks to required dimensions – the ability to prepare components according to specified measurements supports construction work requiring sizes different from standard factory-produced blocks.
CORMAK CS350 Cutting Capacity – What Dimensions Can Be Processed?
The suitability of the band saw depends on three parameters that should be considered separately: a maximum cutting height of 650 mm, a cutting width of 420 mm, and a cutting length of 650 mm.

Technical Specifications – CORMAK CS350
Motor power 1.85 kW
Power supply voltage 400 V
Maximum cutting height 650 mm
Maximum cutting width 420 mm
Maximum cutting length 650 mm
Blade speed 140 m/min
Band saw blade dimensions 34 × 4120 mm
Drive wheel diameter 440 mm
Machine length 1050 mm
Gedpfj Akc Ugsx Af Sekd
Machine height 1980 mm
Machine width 1120 mm
Worktable width in transport position 760 mm
Sliding worktable dimensions 710 × 1060 mm
Worktable height 750 mm
Weight 205 kg

Applications – Suitable Materials
The CORMAK CS350 masonry block band saw is designed for cutting various types of masonry and construction materials, including:

1. Autoclaved Aerated Concrete (AAC) Blocks:
- Ytong
- Solbet
- H+H
- Termalica
2. Aerated Concrete:

- Suporex

3. Ceramic Hollow Blocks:

- Porotherm

4. Calcium Silicate Blocks:

- Silka

5. Concrete and Foundation Blocks

6. Lightweight Expanded Clay Aggregate (LECA) Blocks:

- Expanded clay concrete blocks

7. Bricks