マシニングセンター

CNC-Technik ALM-1204-002

We offer this like-new CNC-Technik ALM-1204-002 machining center, manufactured in 2022.

Working area: 1,250 x 1,000 x 180 mm
Country of origin: Germany

Tangential unit preparation for the AL-M series
Electronics upgrade with a 4th motor driver for controlling the tangential module or rotary axis
Hsdpfxozfwave An Ijp

Inductive tool length sensor

AMB 1400 FME-P
Technical specifications:
Input power: 1,400 W
Rotation speed: 5,000 ... 25,000 rpm
Mounting to the portal: 43 mm mounting flange
Collet: ER16
Weight: 1.80 kg
Power connection: 4 m power cable

Set of 3 ER-16 collets
Collet dimensions:

Vacuum table milled into the plate
Grid spacing 20 mm
Includes M6 threaded holes in the grid

Vacuum pump TOPAS E101 V 2.2 kW (set)
Oil-lubricated rotary vane vacuum pump
DS motor, 2.2 kW
230/400 V 50 Hz IE3
Motor version with PTC (standard)
Nominal pumping capacity 100 m³/h
Ultimate vacuum 0.5 mbar (abs.) without gas ballast
1.5 mbar (abs.) with gas ballast
Includes suction filter 1 1/4" and paper filter cartridge
Flow rate 84 m³/h

The drive operates on 180-watt servo motors and 16 mm ball screws.
With this configuration, the maximum speed, depending on the spindle pitch and software, is 500 mm per second. The control system operates with ground and hardened roller guides featuring a gothic profile.

If you have any questions or require further information, please write or call us.

この広告は自動翻訳されています。翻訳ミスがある可能性があります。