計量・混合プラント

Atlas Copco VDS P6030 + A310 + LiquiPrep LP804

Atlas Copco / Scheugenpflug
The entire system is unused and in like-new condition
Model: VDS P6030
Automatic processing of a complete cycle from loading to unloading
Mixing of two components (e.g., resin and hardener) directly in-process
Precise application of material at defined positions on the workpiece
Component handling via a 3-axis system (X, Y, Z)
Operation in automatic, semi-automatic, and manual modes

Technical data:
Power supply: 400 V AC, 50/60 Hz
Rated current: 13.6 A
Power consumption: 8.5 kVA
Fusing: 3 × 32 A
Control voltage: 24 V DC
Operating pressure: 6 bar
Pressure monitoring: 4 bar
Compressed air connection: 6 bar
Operating temperature: +10 °C to +40 °C
Storage temperature: −20 °C to +60 °C
Humidity: 10% to 85% (non-condensing)
Control cabinet protection class: IP21
Foundation slope: max. 0.05%
Clearance around machine: 0.8 m
Clearance in front of control cabinet: 1.2 m
Width: 1660 mm x Height: 2305 mm x Depth: 1315 mm
Weight: 600 kg
Sound pressure level: ≤ 70 dB(A)

Model: A310
Technical data:
Tank volume: 60 l resin and 20 l hardener
Agitator in each tank
Vacuum sensor for each tank
Level sensors including overfill protection
Suction valve per tank
Sight glass with illumination
Vacuum degassing directly in tank
Material circulation to prevent sedimentation
Optional tank heating
Pneumatically driven piston pumps
Delivery volume approx. 294 cm³ per stroke
1 or 2 pumps per tank possible
Continuous dosing with dual pump system
Pump variants: horizontal and vertical, suitable for highly viscous materials
Vacuum generation via vacuum pump or ejector
Oil separator to protect vacuum pump
Pedpoy Naf Esfx Ab Rept
Control via SCP touch panel
Operating modes: Automatic, pause, external control
Material circulation during pause mode
Possible integration to external control via interface
Monitoring of production time, system availability, and material consumption
Calculation of remaining material availability
Power supply: 230 V or 400 V AC
Operation outside EU with transformer possible
Operating temperature: +5 °C to +40 °C
With vacuum pump: +10 °C to +40 °C
Humidity: 10 to 80 percent
Protection class: IP20
Dimensions: Width 700 mm x Height 1950 mm x Depth approx. 1165 mm
Weight: approx. 400 kg

Model: LP804
Technical data:
Application: Conveying and preparation of 1K and 2K dispensing materials (low to medium viscosity, also abrasive)
Tanks have 50 and 20 liter capacity
Control voltage: 24 V DC
Power supply: per wiring diagram
Rated current: per wiring diagram
Power consumption: per wiring diagram
Fusing: per wiring diagram
Operating pressure: 6 bar
Pressure monitoring: 4 bar
Operating temperature: +10 °C to +40 °C
Storage temperature: −20 °C to +60 °C
Humidity: 10% to 85% (non-condensing)
Control cabinet protection class: IP54
System protection class: IP20
Installation surface: max. 0.5% slope
Clearance around system: 0.8 m
Clearance in front of control cabinet: 1.2 m
Dimensions: Width: 1500 mm x Height: 2050 mm x Depth: 770 mm
Weight: 430 kg
Noise level: ≤ 70 dB(A)
Condition: unused

Scope of delivery: (see picture)

(Changes and errors in technical data and specifications reserved!)

For further questions, please feel free to contact us by phone.

この広告は自動翻訳されています。翻訳ミスがある可能性があります。