立形マシニングセンタ

Hartford HCMC1682

Hartford HCMC 1682 – Heidenhain TNC640, used – Year of manufacture 2021 – low hours!

Hartford vertical CNC machining center equipped with Heidenhain TNC640 control, oversized precision flat guides in X, Y, and Z axes, moveable clamping table, and a powerful main spindle with SK50 tool holder. The machine features a closed cooling circuit for the spindle and an automatic two-stage gearbox, spindle speed n = 10–6,000 rpm, max. power Pmax = 38 kW, max. torque Mmax = 979 Nm, a 32-position tool magazine with quick-change arm, and an ergonomically optimized work area enclosure. The enclosure has electronically monitored front sliding doors with inspection windows, as well as loading/unloading access to the tool magazine from the rear.

Spindle: SK50, 38 kW, max. 979 Nm / max. 6,000 rpm
Air cooling with compressed air nozzle at the spindle nose, cooling via M-function is programmable.

Working area:
X-axis, longitudinal: 1,600 mm
Y-axis, lateral: 820 mm
Z-axis, vertical: 660 mm

Clamping table size: 1,750 x 820 mm
Max. table load: 2,200 kg
T-slots: 5 units
T-slot spacing: 150 mm
T-slot width: 18 mm

Tool magazine: 32 positions
Tool diameter: Ø 125 mm
Max. tool length: 350 mm
Max. tool weight: 20 kg

Cooling system:
Coolant:
External coolant supply nozzles installed at the spindle nose (vertical slide).
Coolant returns via two transverse and one longitudinal conveyor into the coolant tank. The coolant is pumped from the tank as required (via M-function or switch on the control panel) through the nozzles. Mechanical sieves are provided in the coolant tank for coolant filtration.
Optional:
For internal coolant supply (ICS), a high-pressure pump with a simple filter system is available. When ICS is activated, coolant is pumped from the tank through the high-pressure pump and filter system.
Lhodpoy I Uzrofx Af Teg

Electronic handwheel
Oil skimmer in the cooling system
Blow-off and rinse guns
Chip conveyor
Automatic wireless 3D probe (Renishaw) for workpiece probing
Automatic tool breakage control (Renishaw)

The machine has only been used for a single job. As that order is no longer present, the machine is surplus to requirements.
This is a very robust machine with high spindle performance – ideal for heavy-duty machining operations.
The machine can be inspected under power at its current location.

Note: The clamping devices shown in the pictures are not part of the delivery!
Price: ex works
Dismantling, transport, and commissioning can be offered on request!

この広告は自動翻訳されています。翻訳ミスがある可能性があります。